When a plant manager asks us about robotic automation, the conversation almost always lands on the same quiet question: “Who else has trusted you with this?”
It’s a fair question. Automation is not a brochure exercise. It is a live production decision that touches quality, throughput, safety and the careers of the people running the line. So the real test is not what we say about ourselves — it is who has already put ICA systems on their factory floor and kept them running.
This post is our answer to that question.
Trusted by names you already know
At Industrial Controls & Automation we have designed, built and commissioned robotic and automation systems for some of India’s well-known manufacturers. Our client list includes:
- Lucas
- TVS Groups
- Rane
- Wipro
- Preethi
- Uno Minda
- Tata Groups
These are not logo slides. They are live plants where our systems run shift after shift. When we talk about robotic screw tightening, dispensing, soldering, injection-moulding take-out or complete turnkey assembly lines, we are talking about the same engineering approach that those companies already use.
OEM Robot Recognition — and why that matters
ICA has received OEM robot recognition for its work as a robotic automation solution provider. This recognition reflects sustained delivery of robotic cells that meet the engineering and support standards expected by leading robot manufacturers.
For a plant that is evaluating robotic screw tightening or multi-station assembly automation, this matters in a practical way: the integrator has already been vetted against the standards that large automotive and electronics manufacturers demand when they put robots on a production line — and the partnership is active, not historical.
As an authorised Epson Robots dealer for Tamil Nadu, we also bring Japanese-built robot technology together with local engineering, integration and after-sales support. Whether the application calls for a SCARA, a 6-axis arm or a collaborative robot, the focus remains the same: a cell that performs reliably on the customer’s actual part and process.
Built in-house in Chennai and Coimbatore
We design, build and commission from our facilities in Chennai and Coimbatore. That in-house model is deliberate.
It means the same team that specifies the cell also owns the mechanical design, the electrical panels, the PLC and HMI programming, the vision integration, the safety circuits and the final commissioning on your shop floor. There is no hand-off between a design house and a separate fabricator — and therefore fewer places for a missed requirement to hide.
What we typically deliver under one roof:
- Robotic assembly systems and multi-station turnkey lines
- Robotic screw tightening cells with torque/angle monitoring and error-proofing
- Dispensing and soldering cells
- Injection-moulding take-out robots (horizontal and vertical)
- Vision-guided systems, conveyors, pressing and testing stations
- Complete end-of-line and special-purpose machines
You can see the full range of solutions we engineer on our products page and in more detail under robotic automation and the Indus AI Robot range.
Exclusive Lavi Chip distributorship
ICA is the exclusive distributor of Lavi Chip in India. That gives our clients a single accountable source for genuine motion-control components, local technical support and faster availability — without multiple reseller layers.
On a live line, a delayed or incorrect part is not a purchasing inconvenience; it is downtime. Having the component source and the system integrator under the same roof reduces that risk.
Why credibility matters most on screw-tightening and assembly cells
In an earlier post we looked at the real cost of a missed or under-torqued screw — rework, warranty claims, audits and, in the worst case, recalls. The uncomfortable truth is that on a manual line you can rarely prove every joint was driven to specification. You can only assume it was.
A properly engineered robotic screw-tightening cell changes that. Torque and angle are monitored on every joint. Screw count is error-proofed. Results are timestamped and tied to the individual part. Zero missed screws becomes provable, not hoped for.
That level of process control only works when the integrator understands both the robot and the real production constraints of the part. The companies that have already trusted ICA with these cells did so because the engineering, the integration and the after-sales support held up under actual line pressure — not just in a demonstration.
Questions worth asking any integrator on a site visit
If you are shortlisting automation partners, these questions tend to separate brochure claims from real capability:
The answers reveal more about long-term reliability than any specification sheet.
What this means if you are exploring automation
If your plant is looking at robotic screw tightening, assembly automation, dispensing, soldering or a complete turnkey line, the decision is rarely about the robot brand alone. It is about the partner who will specify the cell against your actual part, integrate it into your existing line, validate it against your quality requirements, and still answer the phone when something unexpected happens three months later.
That is the work we do every day from Chennai and Coimbatore:
- End-to-end ownership — design, build, commission and support under one roof
- Proven delivery with manufacturers you already recognise
- OEM robot recognition as a robotic automation solution provider
- Authorised Epson Robots dealer for Tamil Nadu
- Exclusive Lavi Chip distributorship in India
You can read more about who we are and how we work on our About page.
A simple next step
If you are evaluating automation for screw tightening, assembly or any process that currently depends on operator consistency, we would rather start with a conversation about your part and your current process than with a product pitch. Share a component drawing, a photo of the current station, a cycle-time target, or even a short description of the operation that is causing quality variation or labour pressure.
Our engineers will tell you honestly whether a robotic cell is the right answer — and what the realistic payback looks like.
That is how the relationships with Lucas, TVS Groups, Rane, Wipro, Preethi, Uno Minda, Tata Groups and the rest of our client list began. Not with a sales deck, but with a practical problem that needed a reliable solution.