ICA's testing and quality inspection systems include motor testing machines, armature testing machines, air leak testing machines, valve endurance testing machines and camera-based vision inspection. Each is built to your test specification with fixturing, instrumentation, PLC/HMI control and result logging for full traceability.
A defect that reaches your customer costs many times more than one caught at the end of your line. ICA builds test benches and inspection stations that make that decision automatically — same parameters, same limits, same judgement on every part, with the result recorded against the serial number.
Every machine is engineered around your component and your test standard. Tell us what you need to measure and to what limits, and we design the fixture, select the instrumentation and deliver a commissioned station with operator training.
Purpose-built stations for electrical, pneumatic and endurance testing.
Testing equipment used to evaluate motor performance parameters such as operation, electrical characteristics, speed, torque and functionality.
Specialized testing system used to inspect and verify armature components for electrical performance, defects and quality control.
Testing system used to detect leakage in components by applying controlled air pressure and measuring pressure loss or leakage rate.
Automated testing equipment used to evaluate valve durability, reliability and performance through repeated operating cycles.
A camera-based inspection system used for automated quality checking, measurement, defect detection and product verification — inspecting 100% of parts objectively, without inspector fatigue.
Match what you need to verify with the appropriate testing system.
| Machine | What It Verifies | Method | Typical Output |
|---|---|---|---|
| Motor Testing Machine | Motor operation, speed, torque, electrical characteristics | Powered functional test | Pass / fail + measured values |
| Armature Testing Machine | Armature electrical performance and defects | Electrical test | Pass / fail + defect type |
| Air Leak Testing Machine | Component leak tightness | Controlled air pressure, pressure-loss measurement | Leak rate + pass / fail |
| Valve Endurance Testing Machine | Valve durability and reliability | Repeated operating cycles | Cycle count + performance report |
| Vision Inspection System | Presence, dimensions, defects, codes | Camera-based imaging | Pass / fail + inspection image |
Every part is tested to the same limits — no missed defects and no operator-to-operator variation.
Catch failures at the end of your line instead of in the field, cutting warranty and rework cost.
Results logged against each part for audits, customer requirements and continuous improvement.
Testing equipment used to evaluate motor performance parameters such as operation, electrical characteristics, speed, torque and functionality — typically installed at the end of a motor assembly line.
It detects leakage in components by applying controlled air pressure and measuring pressure loss or leakage rate over a fixed test time, giving an objective pass or fail result against your specified limit.
It is a specialized testing system used to inspect and verify armature components for electrical performance, defects and quality control before they proceed to the next assembly stage.
Automated testing equipment used to evaluate valve durability, reliability and performance through repeated operating cycles, with cycle counts and performance data recorded for the test report.
Yes. We design and build custom test benches and special purpose testing machines to your test specification — including fixturing, instrumentation, PLC/HMI control, pass-fail marking and data logging.
Tell us what you need to measure and to what limits — our engineers will propose a test station design and cycle time.
Request a ConsultationRelated solutions: Vision Systems · Robotic Automation · Pressing Systems · All Products & Services